POTTER TOWER

POTTER TOWER

MURHOPYE POTTER TOWER is suitable for studying the biological effect both when applied as a direct spray on the organisms or as a residual film. The design incorporates a detachable atomiser assembly, mechanically adjustable spray table and control arrangement to regulate air supply mounted on the equipment for convenient operation.

Construction and equipment details:

• The Frame is made using MS angle iron sections, finished in pleasing colours. Adjustment screws at the base facilitate easy leveling.
• Spray tube is made of SS 304 with mirror finish and positioned centrally by three screw mounted on the intermediate platform.
• Spray atomiser is supplied as a standard feature is located centrally and comes with a sample holder assembly. All these are mounted on the tower itself for ease of operation.
• Spray table is used for positioning the specimen dish beneath the spray tube and its height is adjustable.
• A regulated air supply of 1.5 to 2 kg/cm2 is required. Air supply from the user’s mains can be connected to the nozzle provided at the back of the tower. A pressure gauge, mounted on the front panel indicates the pressure. A needle valve is provided on the front panel for fine adjustment of airflow. A suitable air compressor can be supplied (optional).

Model and specifications:

• Model no. MRP-PT-M
• Spray tube length - 600 mm; diameter 180 mm.
• Specimen dish diameter- 110 mm max.
• Standard sample reservoir capacity – 20 cc
• Tower overall dimensions- 1000 X 370X 370 mm.